Table of Contents
Advertisement
Table 136 Advanced Application > ONT Template > Uniport VoIP
LABEL
Sip-profile
Username
Password
Dial-plan
Aor
Dispname
Vmail-uri
Vmail-extimer
Release-timer
Roh-timer
Add
Cancel
Clear
Index
AID
Active
VID
Rule
Delete
*
Delete
Cancel
38.2.6 ONT ACL
Use this screen to assign an identification number to an ACL profile, and associate the ACL profile with
an ONT template. To apply an ONT template to an ONT, go to the Advanced Application > ONT Quick
Setup screen.
Click ONT ACL in the Advanced Application > ONT Template screen to display the screen as shown.
Note: An ONT can accept up to 16 ACL profiles.
Chapter 38 ONT Template
DESCRIPTION
Select the SIP profile to apply to have this VoIP rule apply. Click Voip-Sip-Profile to view the profile
details.
Type 1 to 25 characters for the user name used for VoIP authentication.
Type 1 to 25 printable characters for the password used for VoIP authentication.
Select the dial plan profile to apply to this VoIP rule. Click Voip-Dial-Plan to view the profile details.
Type the user identification part of the address of record (from 1 to 63 characters).
Type the customer ID (up to 25 characters) used for the display attribute in outgoing SIP
messages.
Enter the IP address or URL (up to 63 characters) of the SIP voicemail server for signaling
messages.
Enter the voicemail subscription expiration time (from 0 to 3600 seconds).
Enter the release timer (from 0 to 30 seconds).
Enter the time (from 0 to 30 seconds) for deciding the receiver is off hook.
Click Add to add a UNI port VoIP entry.
Click Cancel to clear the fields.
Click Clear to return the screen's settings to the defaults.
This is the index number of a UNI port VoIP rule.
This is the UNI port's ID in the format: uniport-<pon>-<ont>-<card>-<port>.
This displays whether the VoIP rule is active (Y) or not (N).
This displays the VLAN ID the UNI port uses for VoIP traffic.
This displays the VoIP rule settings for UNI ports.
Select this for one or more entries and click Delete to remove them.
Select this to select all of the entries for deletion.
Click Delete to remove the entries with the Delete option selected.
Click Cancel to begin configuring the screen again.
OLT2406 User's Guide
313
Advertisement
Table of Contents
Troubleshooting
