Internet Access Wizard Setup: Voice Configuration; Figure 15 Wizard Setup: Third Screen; Table 9 Wizard Setup: Voice Configuration - ZyXEL Communications Prestige 2602R Series User Manual

Prestige 2602R Series User's Guide

3.1.3 Internet Access Wizard Setup: Voice Configuration

Use this screen to configure the voice settings (for the Prestige's SIP account one) with the
information from your voice service provider.

Figure 15 Wizard Setup: Third Screen

The following table describes the fields in this screen.

Table 9 Wizard Setup: Voice Configuration

LABEL
Active
SIP Number
SIP Local Port
SIP Server Address
SIP Server Port
REGISTER Server
Address
62
DESCRIPTION
Select this check box to have the Prestige use this SIP account. Clear the
check box to have the Prestige not use this SIP account.
Enter your SIP number in this field (use the number or text that comes before
the @ symbol in a full SIP URI). You can use up to 127 ASCII characters.
Use this field to configure the Prestige's listening port for SIP. Leave this field
set to the default if you were not given a local port number for SIP.
Type the IP address of the SIP server in this field. It doesn't matter whether
the SIP server is a proxy, redirect or register server.
Enter the SIP server's listening port for SIP in this field. Leave this field set to
the default if your VoIP service provider did not give you a server port number
for SIP.
Enter the SIP register server's address in this field.
Note: If you were not given a register server address, then
enter the address from the SIP Server Address field
again here.
Chapter 3 Wizard Setup