Gui-Based Ftp Clients; Ftp Restrictions - ZyXEL Communications OLT2406 User Manual

84.3 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.
Table 315 General Commands for GUI-based FTP Clients
COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory

84.3.1 FTP Restrictions

FTP will not work when:
• FTP service is disabled in the service access control configuration.
• The IP addresses in the remote management configuration do not match the client IP address. If it
does not match, the OLT will disconnect the FTP session immediately.
Chapter 84 File Management
DESCRIPTION
Enters the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically
supplied to the server for anonymous access.
Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to
login.
Transfers files in either ASCII (plain text format) or in
binary mode. Configuration and firmware files should be
transferred in binary mode.
Specifies the default remote directory (path).
Specifies the default local directory (path).
OLT2406 User's Guide
609