Table of Contents
Advertisement
Table 170 Management > Access Control > Logins (continued)
LABEL
Privilege
Apply
Cancel
44.5 Service Access Control
Service Access Control allows you to decide what services you may use to access the OLT. You may
also change the default service port and configure "trusted computer(s)" for each service in the
Remote Management screen (discussed later). Click Access Control to go back to the main Access
Control screen.
Figure 223 Management > Access Control > Service Access Control
The following table describes the fields in this screen.
Table 171 Management > Access Control > Service Access Control
LABEL
Services
Active
Chapter 44 Access Control
DESCRIPTION
Type the privilege level for this user. At the time of writing, users may have a privilege level of 0,
3, 13, or 14 representing different configuration rights as shown below.
•
0 - Display basic system information.
•
3 - Display configuration or status.
•
13 - Configure features except for login accounts, SNMP user accounts, the
authentication method sequence and authorization settings, multiple logins, administrator
and enable passwords, and configuration information display.
•
14 - Configure login accounts, SNMP user accounts, the authentication method
sequence and authorization settings, multiple logins, and administrator and enable
passwords, and display configuration information.
Users can run command lines if the session's privilege level is greater than or equal to the
command's privilege level. The session privilege initially comes from the privilege of the login
account. For example, if the user has a privilege of 5, he/she can run commands that requires
privilege level of 5 or less but not more.
Click Apply to save your changes to the OLT's run-time memory. The OLT loses these changes
if it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Services you may use to access the OLT are listed here.
Select this option for the corresponding services that you want to allow to access the OLT.
OLT2406 User's Guide
360
Advertisement
Table of Contents
Troubleshooting
