Link Aggregation Id; Link Aggregation Commands - ZyXEL Communications OLT2406 User Manual

Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing network
topology loops.

68.2.1 Link Aggregation ID

LACP aggregation ID consists of the following information
Table 246 Link Aggregation ID: Local Switch
SYSTEM PRIORITY
0000
Table 247 Link Aggregation ID: Peer Switch
SYSTEM PRIORITY
0000

68.3 Link Aggregation Commands

The following table describes the related commands.
Table 248 Trunk Commands
COMMAND
show trunk
trunk <T1|T2>
no trunk <T1|T2>
trunk <T1|T2> criteria <src-
mac|dst-mac|src-dst-mac|src-
ip|dst-ip|src-dst-ip>
no trunk <T1|T2> criteria
trunk <T1|T2> interface <aid>
no trunk <T1|T2> interface <aid>
trunk <T1|T2> lacp
no trunk <T1|T2> lacp
trunk interface <aid> timeout
<lacp-timeout>
Table 249 LACP Commands
COMMAND
show lacp
lacp
3. Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
MAC ADDRESS
00-00-00-00-00-00
MAC ADDRESS
00-00-00-00-00-00
OLT2406 User's Guide
490
3
:
KEY PORT PRIORITY
0000 00
KEY PORT PRIORITY
0000 00
DESCRIPTION
Displays link aggregation information.
Activates a trunk group.
Disables the specified trunk group.
Sets the traffic distribution type used for the
specified trunk group.
Returns the traffic distribution type used for the
specified trunk group to the default (src-dst-
mac).
Adds a port(s) to the specified trunk group.
aid: slot-<slot> | msc-<slot>-<port>
Removes ports from the specified trunk group.
Enables LACP for a trunk group.
Disables LACP in the specified trunk group.
Defines LACP timeout period (in seconds) for the
specified port(s).
lacp-timeout: 1 or 30
DESCRIPTION
Displays LACP (Link Aggregation Control
Protocol) settings.
Enables Link Aggregation Control Protocol
(LACP).
PORT NUMBER
0000
PORT NUMBER
0000
M P
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
M P
E 3
C 13