REAR SUSPENSION
7. Front Link
A: REMOVAL
1) Lift-up the vehicle, and then remove the rear
wheels.
2) Support the rear arm horizontally using trans-
mission jack.
(1)
(1) Rear arm
(2) Transmission jack
3) Remove the bolt which secure front link to sub
frame.
4) Remove the bolt which secure front link to rear
arm, and then remove the front link.
Front Link
(2)
RS-00052
RS-00072
RS-00073
B: INSTALLATION
1) Support the rear arm horizontally using trans-
mission jack.
2) Using new self-locking nuts, install the front link.
(1)
(1) Rear arm
(2) Transmission jack
CAUTION:
Install the front link with the protrusion side
faced to the front side of vehicle.
(1) Front
NOTE:
Inspect the wheel alignment and adjust it if neces-
sary.
Tightening torque:
⋅
57 N
m (5.8 kgf-m, 42 ft-lb)
C: INSPECTION
Visually check the front link for damage and defor-
mation.
RS-18
(2)
RS-00052
(1)
RS-00075