Subaru Legacy 2005 Service Manual page 2971

Corrective action: Increase thickness of drive pin-
ion height adjusting washer in order to bring drive
pinion close to hypoid driven gear.
• Flank contact
Checking item: Backlash is too small.
Contact pattern
Corrective action: Reduce thickness of drive pinion
height adjusting washer in order to bring drive pin-
ion away from hypoid driven gear.
• Toe contact (inside end contact)
Checking item: Contact areas is small
Contact pattern
Rear Differential (VA-type)
Corrective action: Reduce thickness of drive pinion
height adjusting washer in order to bring drive pin-
ion away from hypoid driven gear.
AT-00212
Checking item: Contact areas is small
Contact pattern
AT-00209
Corrective action: Increase thickness of drive pin-
ion height adjusting washer in order to bring drive
pinion close to hypoid driven gear.
AT-00213
18) If proper tooth contact is not obtained, once
again adjust the drive pinion height and the differ-
ential side bearing preload (already mentioned)
and the hypoid gear backlash.
AT-00210
DI-69
• Heel contact (outside end contact)
DIFFERENTIALS
AT-00213
AT-00211
AT-00212