Subaru Legacy 2005 Service Manual page 2896

Aluminum Wheel
WHEEL AND TIRE SYSTEM
4. Aluminum Wheel
A: REMOVAL
Refer to "Steel Wheel" for removal procedure of
aluminum wheels. <Ref. to WT-5, REMOVAL,
Steel Wheel.>
B: INSTALLATION
Refer to "Steel Wheel" for installation procedure of
aluminum wheels. <Ref. to WT-5, INSTALLATION,
Steel Wheel.>
C: INSPECTION
Refer to "Steel Wheel" for inspection procedure of
aluminum wheels. <Ref. to WT-5, INSPECTION,
Steel Wheel.>
Rim runout:
Axial runout specification Radial runout specification
1.0 mm (0.039 in)
D: CAUTION
Aluminum wheels are easily scratched. To main-
tain their appearance and safety, do the followings:
1) Do not damage the aluminum wheels during re-
moval, installation, wheel balancing, etc. After re-
moving the aluminum wheels, place them on a
rubber mat, etc.
2) When washing the aluminum wheel, use neutral
synthetic detergent and water. Avoid using the
cleanser including abrasive, hard brushes or an au-
tomatic car washer.
WT-6