Table of Contents
Advertisement
Step
1
DATA CHECK SUBARU SELECT MONITOR.
1) Select {Current Data Display & Save} in
Subaru Select Monitor.
2) Read the condition of "ABS warning light".
2
CHECK WIRING HARNESS.
Measure the resistance between ABSCM&H/U
connector and combination meter connector.
Connector & terminal
(i10) No. 5 — (B301) No. 22:
3
CHECK POOR CONTACT IN CONNECTOR. Is there poor contact in
Subaru Select Monitor
Check
Is "ON" indicated?
Is the resistance less than 0.5
Ω?
ABSCM&H/U connector and
combination meter connector?
ABS(diag)-23
ABS (DIAGNOSTICS)
Yes
Replace the
Go to step 2.
ABSCM only.
<Ref. to ABS-8,
REPLACEMENT,
ABS Control Mod-
ule and Hydraulic
Control Unit
(ABSCM&H/U).>
Go to step 3.
Repair the har-
ness and connec-
tor between
ABSCM&H/U and
combination meter
connector.
Repair the con-
Check the combi-
nector.
nation meter.
No
Advertisement
Chapters
Table of Contents
