Prerequisites; Controlling Web Users By Source Ip Addresses; Disconnecting A Web User By Force; Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches

7.4.1 Prerequisites

The controlling policy against Web users is determined, including the source IP
addresses to be controlled and the controlling actions (permitting or denying).

7.4.2 Controlling Web Users by Source IP Addresses

Controlling Web users by source IP addresses is achieved by applying basic ACLs,
which are numbered from 2000 to 2999.
Table 7-5 Control Web users by source IP addresses
Operation
Enter system view
Create
ACL or enter basic
ACL view
Define rules for the
ACL
Quit
view
Apply the ACL to
control Web users

7.4.3 Disconnecting a Web User by Force

The administrator can disconnect a Web user by force using the related command.
Table 7-6 Disconnect a Web user by force
Operation
Disconnect a Web
user by force

7.4.4 Configuration Example

I. Network requirements
Only the users sourced from the IP address of 10.110.100.46 are permitted to access
the switch.
system-view
a basic acl number
[ match-order { config |
auto } ]
rule [ rule-id ] { permit |
deny } [ source { sour-addr
sour-wildcard | any } ]
[ time-range time-name ]
[ fragment ]
to system
quit
ip http acl acl-number
free web-users
user-id userid | user-name
username }
Huawei Technologies Proprietary
Command
acl-number
Command
{ all |
7-7
Chapter 7 Controlling Login Users
Description
—
As for the acl
command, the
keyword is specified
default.
Required
—
Optional
Description
Required
Execute this command in user
view.
number
config
by