Ftp Server Configuration Commands; Display Ftp-Server - Huawei Quidway S2000 Series Command Manual

Command Manual - System Management
Quidway S2000 Series Ethernet Switches
Example
# Get the current configuration files stored in the flash memory.
<Quidway> save
This will save the configuration in the flash memory.
The switch configurations will be written to flash.
Are you sure?[Y/N]
Now saving current configuration to flash memory.
Please wait for a while...
Save current configuration to flash memory successfully.

1.3 FTP Server Configuration Commands

1.3.1 display ftp-server

Syntax
display ftp-server
View
Any view
Parameter
none
Description
Using display ftp-server command, you can view the parameters of the current FTP
Server. You can perform this command to verify the configuration after setting FTP
parameters.
Example
# Display the configuration of FTP Server parameters.
<Quidway> display ftp-server
FTP server is running
Max user number
User count
Timeout value(in minute)
Chapter 1 File System Management Commands
5
0
30
1-15