Configuration Procedure - Huawei Quidway S2700 Series Quick Start Manual

Quidway S2700&S3700&S5700&S6700 Series Ethernet
Switches
Quick Start
Figure 5-5 Networking diagram of managing SwitchA through Telnet
RS-232
PC
Configuration Roadmap
The configuration roadmap is as follows:
l
l
l
l
l
l
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l

Configuration Procedure

1.
2.
3.
Issue 01 (2011-10-26)
administrator
serial port Console port
Console cable
Log in to SwitchA through the console interface.
Set the device name.
Configure a management VLAN.
On SwitchA, set the type of the interface that connects SwitchA and SwitchB to trunk. Add
the interface to the management VLAN in trunk mode.
Configure the management IP address of SwitchA.
Configure the Telnet service.
ID of the management VLAN
Management IP address of SwitchA
Number of the interface that connects SwitchA and SwitchB on SwitchA
Authentication mode, user name, and password
Log in to SwitchA through the console port. For details, see
Through the Console Interface
.
Set the device name of SwitchA.
<Quidway> system-view
[Quidway] sysname SwitchA
Configure a management VLAN.
[SwitchA] vlan 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Ethernet
SwitchB
GE 0/0/1
GE 0/0/1
SwitchA
5 Logging in to the Device
Logging In to the Switch
51