Creating A Static Mac Address Entry; Creating A Blackhole Mac Address Entry - Huawei Quidway S9300 Configuration Manual

6 MAC Address Table Configuration

6.3.2 Creating a Static MAC Address Entry

Context
Do as follows on the S9300 where you need to configure the MAC address entries.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mac-address static mac-address interface-type interface-number { vlan vlan-id1 |
vlanif vlanif-number [ vsi vsi-name ] }
A static MAC address entry is created.
----End

6.3.3 Creating a Blackhole MAC Address Entry

Context
Do as follows on the S9300 where you need to configure the MAC address entries.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mac-address blackhole mac-address { vlan vlan-id1 | vsi vsi-name }
A blackhole MAC address entry is created.
----End
6-4
NOTE
To delete a static MAC address entry, run the undo mac-address mac-address { vlan vlan-id | vsi vsi-
name } command.
To delete all teh static MAC address entries, run the undo mac-address static command.
NOTE
To delete a blacklist MAC address entry, run the undo mac-address mac-address { vlan vlan-id | vsi vsi-
name } command.
To delete all the blacklist MAC address entries, run the undo mac-address blackhole command.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
Issue 03 (2009-08-20)