Configuration Examples; Example For Configuring Local Port Mirroring - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management

8.17 Configuration Examples

This section provides several configuration examples for mirroring.

8.17.1 Example for Configuring Local Port Mirroring

Networking Requirements
As shown in
sent from the L2 switch to the Switch need to be monitored on the PC. You can configure local
port mirroring on the Switch to implement this function.
You need to configure Ethernet 0/0/1 as a mirrored port and Ethernet 0/0/24 as an observing
port.
Figure 8-4 Networking diagram of local port mirroring
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
Issue 01 (2011-07-15)
Figure 8-4, the Switch is connected to an L2 switch, a PC, and a router. Packets
Router
Switch
Eth 0/0/1
L2 Switch
Configure Ethernet 0/0/24 as an observing port.
Configure Ethernet 0/0/1 as a mirrored port.
IDs of the VLANs to which the interfaces need to be added
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Eth 0/0/3
Eth 0/0/24
Mirroring host
8 Mirroring
105