Port Isolation Configuration Example - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Port Isolation
Quidway S3100 Series Ethernet Switches
1.3 Displaying Port Isolation
After the above configuration, you can execute the display command in any view to
display the information about the Ethernet ports added to the isolation group.
Table 1-2 Display port isolation
Display the information about the Ethernet
ports added to the isolation group.

1.4 Port Isolation Configuration Example

I. Network requirements
PC 2, PC 3 and PC 4 are connected to Ethernet1/0/2, Ethernet1/0/3 and
Ethernet1/0/4 ports.
The switch connects to the Internet through Ethernet1/0/1 port.
It is desired that PC 2, PC 3 and PC 4 cannot communicate with each other.
II. Network diagram
Ethernet1/0/2 Ethernet1/0/2
PC2 PC2
Figure 1-1 Network diagram for port isolation configuratio
III. Configuration procedure
# Add Ethernet1/0/2, Ethernet1/0/3 and Ethernet1/0/4 ports to the isolation group.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
Operation
Internet Internet
Ethernet1/0/1 Ethernet1/0/1
Switch Switch
Ethernet Ethernet
Ethernet1/0/3 Ethernet1/0/3
PC3 PC3
Huawei Technologies Proprietary
1-2
Chapter 1 Port Isolation Configuration
Command
display isolate port
1/0/4 1/0/4
PC4 PC4
n