Configuring Access Port Attribute; Configuring Hybrid Port Attribute - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Port
Quidway S3100 Series Ethernet Switches
Enable flow control on the
Ethernet port

1.2.4 Configuring Access Port Attribute

Table 1-6 Configure access port attribute
Operation
Enter system view
Enter
view
Configure the link type
for the port as access
Add the current access
port into the specified
VLAN

1.2.5 Configuring Hybrid Port Attribute

Table 1-7 Configure hybrid port attribute
Operation
Enter system view
Enter Ethernet port
view
Set the link type for
the port as hybrid
Set the default VLAN
ID for the hybrid port
Add the current hybrid
port into the specified
VLAN
Operation
system-view
Ethernet port
interface
interface-number
port link-type access
port access vlan vlan-id
system-view
interface
interface-number
port link-type hybrid
port hybrid pvid vlan vlan-id
port hybrid vlan vlan-id-list
{ tagged | untagged }
Huawei Technologies Proprietary
Chapter 1 Basic Port Configuration
Command
flow-control
Command
interface-type
Command
interface-type
1-6
Remarks
By default, flow
control is not enabled
on the port.
Remarks
—
—
By default, the link
type for the port is
access.
Optional
Remarks
—
—
Required
Optional
By default, the VLAN of
a hybrid port is VLAN 1.
Optional
For a hybrid port, you
can configure to tag the
packets of specific
VLANs, based on which
the packets of those
VLANs can
processed in differently
ways.
be