Table 142: Configuration Within A Single Service Manager Event; Modifying Qos Configurations In A Single Service Manager Event; Modifying Qos Configurations Using Other Sources - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Broadband Access Configuration Guide
Table 141: Sample Modifications Using Parameter Instances (continued)

Modifying QoS Configurations in a Single Service Manager Event

QoS accepts QoS profile attachments and parameter instances created using multiple
sources (profiles, RADIUS, or Service Manager) within a single Service Manager event.
Events include:
QoS prioritizes the creation of QoS profiles and parameter instances within events.
Table 142 on page 650 lists the sources that overwrite QoS profiles and parameter
instances created by other sources. Each row represents new QoS profiles and
parameter instances; columns represent existing QoS profiles and parameter
instances.

Table 142: Configuration Within a Single Service Manager Event

Modifying QoS Configurations Using Other Sources

You can modify QoS configurations with Service Manager by using other QoS sources.
For example, you can modify a parameter instance that was created with Service
Manager by using the CLI. Similarly, you can use SNMP to detach a QoS profile
attached by Service Manager.
Table 143 on page 651 lists the sources that you can use to modify QoS profile
attachments and parameter instances.
650
Referencing QoS Configurations in Service Definitions
Action QoS Parameter Instance
Deactivate qos-parameter video-bw add 5000000
initial-value 0
Deactivate qos-parameter video-bw 2000000
Subscriber login
Subscriber logout
RADIUS Change of Authority (CoA)
Profile
Profile
RADIUS
Service Manager
Result
5000000 is subtracted from parameter
instance video-bw for a total of
-4000000
Parameter instance video-bw is
removed
RADIUS Service Manager
– –
–