Modifying And Restarting The Fms Service (Cli) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Administrator's Guide
Flash Media Admin Server Port
Administrative username
Administrative password
service owner
service user
service group
12. Finish the installation.
Proceed with the installation? (y/n/q): y

Modifying and Restarting the FMS Service (CLI)

You must manually configure two FMS files. If any configuration changes are made to FMS,
including installation, the FMS services need to be restarted.
1. Modify the FMS server and adminserver files using vi. To do this, first log in to the FMS
shell from the CLI config mode in Media Flow Controller:
application fms shell
2. Locate the server and adminserver files and edit them as indicated; for this line:
if [ "X$USERID" != "Xroot" ]; then
Change to:
if [ "X$USERID" != "Xadmin" ]; then
Example:
test-vos # enable
test-vos # configure terminal
test-vos (config) # application fms shell
BusyBox v1.00 (2008.12.21-08:07+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# ls
fms
# cd fms
# ls
documentation
applications
auto_fms_start_enabled
shmrd
fmsmaster.pid
licenses
fmsmaster
server
License.htm
touch
License.txt
3. Exit the FMS shell by typing exit; the window closes and you must open a new session to
Media Flow Controller.
4. In the new Media Flow Controller session, enter config mode and restart FMS:
service restart mod-rtmp-admin
service restart mod-rtmp-fms
lib bin
Media Flow Controller Configuration Tasks (CLI)
= 1111
= admin
= (suppressed)
= admin
= admin
= admin
tcSrvMsg
uninstallFMS
fmsmgr
logo.gif
logs
conf
fmsadmin
webroot
samples
tmp
fmsedge
Installing and Using FMS in Media Flow Controller (CLI)
fmsadmin.pid
modules
tools
dh1024.pem
scriptlib
fmscore
libasneu.so.1
readme.htm
dh512.pem
adminserver
99