Monitoring Chassis Information - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Table 124: Summary of Key System Properties Output Fields (continued)
Field Values
Idle Time How long the user has been idle.
Related
Documentation

Monitoring Chassis Information

Purpose
Action
Meaning
Table 125: Summary of the Key Output Fields for Chassis Information
Field
Routing Engine Details
660
®
OS for EX Series Ethernet Switches, Release 10.3
Monitoring System Process Information on page 662
Understanding J-Web User Interface Sessions on page 148
Use the monitoring functionality to view chassis properties such as general switch
information, temperature and fan status, and resource information for the EX Series
switch.
To view chassis properties in the J-Web interface, select Monitor > System View >
Chassis Information.
To view chassis properties in the CLI, enter the following commands:
show chassis environment
show chassis fpc
show chassis hardware
Table 125 on page 660 gives information about the key output fields for chassis information.
NOTE: For an EX2200 switch, an EX3200 switch, or an EX4200 standalone
switch, FPC refers to the switch itself. In a Virtual Chassis configuration, FPC
refers to the member switch. In an EX8200 switch, FPC refers to the line card.
Values
Select the Master
to view details about the backup Routing Engine.
Additional Information
tab to view details about the master Routing Engine or select Backup
Copyright © 2010, Juniper Networks, Inc.