Monitoring Tacacs+ Information; Table 67: Show Tacacs Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Related Topics

Monitoring TACACS+ Information

Display TACACS+ information.
Purpose
To display TACACS+ information.
Action
host1#show tacacs
Key = hippo
Timeout = <NOTSET>, built-in timeout of 5 will be used
Source-address = <NOTSET>
IP Address
----------
10.5.0.174
10.5.1.199
To display overall statistics:
host1#show tacacs statistics
To display statistics since they were baselined; deltas are not calculated for the
pending statistics:
host1#show tacacs delta
Table 67 on page 331 lists the show tacacs command output fields.
Meaning

Table 67: show tacacs Output Fields

show statistics tacacs
TACACS+ Configuration, (*) denotes inherited
--------------------------------------------
Tcp
Port Timeout
---- -------
3049 5 (*)
1049 5 (*)
Field Name
Key
Timeout
Source-address
TACACSPLUS Configuration
IP Address
TCP Port
Timeout
Primary
Key
Search
Primary Key Order
------- --------- ------
y hippo (*) 1
n hippo (*) 2
Field Description
Authentication and encryption key
TACACS+ host response timeout in seconds
Alternative source IP address configured
Table contains statistics for each host
IP address of the host
TCP port of the host for each IP address
Timeout interval in seconds for each IP address
This IP address's primary host; options: y = yes, n
= no
Authentication and encryption key for this IP address
Monitoring TACACS+ Information
Chapter 10: Monitoring TACACS+
331