Table 29: Show Radius Statistics Output Fields - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual

Access Accepts
Access Rejects
Access Challenges
Malformed Responses
Bad Authenticators
Requests Pending
Request Timeouts
Unknown Responses
Packets Dropped
Table 29 on page 145 lists the show radius statistics command output fields.
Meaning
NOTE: All descriptions apply to the primary, secondary, and tertiary RADIUS
authentication and accounting servers.

Table 29: show radius statistics Output Fields

Field Name
UDP Port
Round Trip Time
Access Requests
Rollover Requests
Retransmissions
Access Accepts
Access Rejects
Access Challenges
Malformed Responses
Bad Authenticators
Requests Pending
Request Timeouts
Unknown Responses
Chapter 2: Monitoring and Troubleshooting Remote Access
1612
1
0
0
0
0
6
0
5
Field Description
Number of the UDP port of a RADIUS server
Hundreds of seconds from request to response
Number of access requests sent to server
Number of requests coming into server as a result of
the previous server timing out
Number of retransmissions
Number of Access-Accepts received from the server
Number of Access-Rejects received from the server
Number of access challenges received from the server
Number of responses with attributes having an invalid
length or unexpected attributes (such as two
attributes when the response is required to have at
most one)
Number of responses in which the authenticator is
incorrect for the matching request. This can occur if
the RADIUS secret for the client and server does not
match.
Number of requests waiting for a response
Number of requests that timed out
Number of unknown responses. The RADIUS
response type in the header is invalid or unsupported.
Monitoring RADIUS Services Statistics
145