Table 29: Show Radius Statistics Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Meaning
Copyright © 2010, Juniper Networks, Inc.
------------------- -------------
UDP Port 1812
Round Trip Time 0
Access Requests 2809
Rollover Requests 0
Retransmissions 56
Access Accepts 2809
Access Rejects 0
Access Challenges 0
Malformed Responses 0
Bad Authenticators 0
Requests Pending 0
Request Timeouts 72
Unknown Responses 0
Packets Dropped 2
To display RADIUS route-download statistics:
host1#show radius route-download statistics
RADIUS Route-Download Statistics
--------------------------------
Statistic 192.168.30.16
------------------- -------------
UDP Port 1812
Round Trip Time 0
Access Requests 1613
Rollover Requests 0
Retransmissions 6
Access Accepts 1612
Access Rejects 1
Access Challenges 0
Malformed Responses 0
Bad Authenticators 0
Requests Pending 0
Request Timeouts 6
Unknown Responses 0
Packets Dropped 5
Table 29 on page 143 lists the show radius statistics command output fields.
NOTE: All descriptions apply to the primary, secondary, and tertiary RADIUS
authentication and accounting servers.

Table 29: show radius statistics Output Fields

Field Name
UDP Port
Round Trip Time
Access Requests
Rollover Requests
Chapter 2: Monitoring and Troubleshooting Remote Access
Field Description
Number of the UDP port of a RADIUS server
Hundreds of seconds from request to response
Number of access requests sent to server
Number of requests coming into server as a result of
the previous server timing out
143