Table 13: Show Aaa Domain-Map Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

For e series broadband services routers - broadband access

Table of Contents

JUNOSe 11.1.x Broadband Access Configuration Guide

To display the mapping between user domains and virtual routers:

host1#show aaa domain-map

Domain: lac-tunnel; router-name: lac; ipv6-router-name: default

Table 13 on page 120 lists the show aaa domain-map command output fields.

Table 13: show aaa domain-map Output Fields

Monitoring Mapping Between User Domains and Virtual Routers

silent failover

tunnel-group

ipv6-router-name

local-interface

ipv6-local-interface

strip-domain

override-username

override-password

Field Description

Name of the domain

Virtual router to which user domain name is mapped

Name of the tunnel group assigned to the domain

IPv6 virtual router to which user domain name is

Interface information to use on the local (E Series)

side of the subscriber's interface

IPv6 interface information to use on the local (E

Series) side of the subscriber's interface

Local address pool from which the router allocates

addresses for this domain

IP hint is enabled

Strip domain is enabled

Single username used for all users from a domain in

place of the values received from the remote client

Single password used for all users from a domain in

place of the values received from the remote client

Tag that identifies the tunnel

Destination address of the tunnel

--------------