Show Multicast Flow-Map; Table 314: Show Multicast Flow-Map Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show multicast flow-map

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 314: show multicast flow-map Output Fields

Field Name Field Description
Name of the flow map.
Name
Name of the policy associated with the flow map.
Policy
Cache timeout value assigned to the flow map.
Cache-timeout
Bandwidth setting associated to the flow map.
Bandwidth
Whether or not adaptive mode is enabled for the flow map.
Adaptive
Name of the flow map.
Flow-map
Whether or not adaptive mode is enabled for the flow map.
Adaptive
Bandwidth
Redundant sources defined for the same destination group.
Redundant
Sources
2464
®
OS for EX Series Ethernet Switches, Release 10.3
show multicast flow-map
<brief | detail>
<logical-system (all | logical-system-name)>
show multicast flow-map
<brief | detail>
Command introduced in Junos OS Release 8.2.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display configuration information about IP multicast flow maps.
—Display configuration information about IP multicast flow maps on all systems.
none
brief | detail —(Optional) Display the specified level of output.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show multicast flow-map on page 2465
show multicast flow-map detail on page 2465
Table 314 on page 2464 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show multicast flow-map
Copyright © 2010, Juniper Networks, Inc.
Levels of Output
All levels
All levels
All levels
All levels
none
detail
detail
detail