Rep 91.37 Stitch / Roll Motor Lead Screws - Xerox ColorQube 9303 Series Service Manual

REP 91.37 Stitch / Roll Motor Lead Screws

Parts List on PL 91.20 and PL 91.25
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the relevant stitch adjust or roll adjust motor,
2. Use a flat bladed screwdriver to carefully unscrew the relevant lead screw,
21 or PL 91.25 Item 21.
Replacement
1. Replacement is the reverse of the removal procedure.
2. Run the relevant diagnostic routines, refer to
Repairs/Adjustments
REP 91.37
WARNING
GP 14. Disconnect the power cord
WARNING
REP 91.13.
GP 37 Post Part Replacement Routines.
PL 91.20 Item
February 2013
4-384 ColorQube® 9303 Family