Xerox ColorQube 9303 Series Service Manual page 1133

4. Remove the required umbilical from the carriage,
2
Use a flat bladed screwdriver to unclip the umbilical from the carriage. Insert the screw-
driver between the umbilical and carriage then rotate the blade to release the umbilical
(4 positions marked A).
Figure 2 Unclip the umbilical
ColorQube® 9303 Family
Figure 2.
1
Release the wiring
from the top of the
umbilical.
A
A
A
A
February 2013
5. Remove the side and end insulation from around the umbilical on the ink reservoir,
3.
Figure 3 Insulation removal
4-375
Figure
1
Remove the umbilical end
insulation and plastic sur-
round.
2
Remove the side insulation.
Repairs/Adjustments
REP 91.31