Adj 75.1 Tray 5 Paper Tray Guide Setting - Xerox ColorQube 9303 Series Service Manual

ADJ 75.1 Tray 5 Paper Tray Guide Setting

Parts List on PL 75.64
Purpose
To adjust the paper tray guides in tray 5 for A4 / A3 or 8.5 x 11 / 11 x 17 inch paper.
Adjustment
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. Open tray 5 door and allow the tray to lower and remove the paper stack.
2. Adjust the paper guide to the required paper size,
• To set the paper tray guide to A4 / A3 paper size, move the paper guide to the outer
position.
• To set the paper tray guide to 8.5 x 11 / 11 x 17 inch paper size, move the paper
guide to the inner position.
3. Check the registration, refer to dC625
ColorQube® 9303 Family
WARNING
Figure 1.
Registration / Preheat Calibration.
February 2013
4-421
Paper size indicator window
1
Move the handle up to
release the lock on the
paper guide
2
Use the handle to move
the paper guide to the
required paper size
3
Move the handle down
to lock the paper guide
Figure 1 Paper guide adjustment
Repairs/Adjustments
ADJ 75.1