Xerox ColorQube 9303 Series Service Manual page 1146

LCSS Tamper Assembly
1. Remove the LCSS top cover, REP
2. Figure 1, use plastislip grease, PL 26.10 Item
Apply grease to the
shaft
Figure 1 Lower vertical slides
Repairs/Adjustments
ADJ 4.1
12.1-110.
4, to lubricate the tamper assembly.
HVF BM Support Pin
1. Open the BM front door.
2. Fully pull out the BM unit.
3. Figure 2, use plastislip grease,
4. Fully push in the BM unit and close the HVF BM front door.
February 2013
4-388
PL 26.10 Item 4, to lubricate the BM support pin.
Apply grease to the pin
Figure 2 Support pin lubrication
ColorQube® 9303 Family