Low power modes operation
29.10 Low power modes operation
When the MCU enters Stop modes, the OSC is functional depending on CR[ERCLKEN]
and CR[EREFSETN] bit settings. If both these bits are set, the OSC is in operation.
After waking up from Very Low Leakage Stop (VLLSx) modes, all OSC register bits are
reset and initialization is required through software.
29.11 Interrupts
The OSC module does not generate any interrupts.
KV4x Reference Manual, Rev. 2, 02/2015
Preliminary
544
Freescale Semiconductor, Inc.