Peripherals Supported - NXP Semiconductors freescale KV4 Series Reference Manual

Peripherals Supported

Host
0x5a a4 0c 00 f8 0b a 0 00 04 02 00 00 00 00 0b 00 00 00
Figure 14-14. Protocol Sequence for Reset Command
Table 14-30. Reset Command Packet Format (Example)
Reset Parameter
Framing packet start byte
packetType
length
crc16
Command packet commandTag
flags
reserved
parameterCount
The Reset command has no data phase.
Response: The target (Kinetis Flashloader) will return a GenericResponse packet with
status code set to kStatus_Success, before resetting the chip.
14.3 Peripherals Supported
This section describes the peripherals supported by the Kinetis Flashloader.
242
Reset
0x5a a4 04 00 6f 46 0b 00 00 00
ACK :
0x5a a1
GenericResponse:
ACK:
0x5a a1
Value
0x5A
0xA4, kFramingPacketType_Command
0x04 0x00
0x6F 0x46
0x0B - reset
0x00
0x00
0x00
KV4x Reference Manual, Rev. 2, 02/2015
Preliminary
Target
Process command
Freescale Semiconductor, Inc.