Property Definitions - NXP Semiconductors freescale KV4 Series Reference Manual

Get/SetProperty Command Properties
Table 14-31. Properties used by Get/SetProperty Commands, sorted by Value (continued)
Property
ReservedRegions
RAMStartAddress
RAMSizeInBytes
SystemDeviceId
FlashSecurityState

14.4.1 Property Definitions

Get/Set property definitions are provided in this section.
14.4.1.1 CurrentVersion Property
The value of this property is a 4-byte structure containing the current version of the
flashloader.
Bits
Field
14.4.1.2 AvailablePeripherals Property
The value of this property is a bitfield that lists the peripherals supported by the
flashloader and the hardware on which it is running.
252
Writable Tag Value
No 0Ch
No 0Eh
No 0Fh
No 10h
No 11h
Table 14-32. Fields of CurrentVersion property:
[31:24]
Name = 'K' (0x4B) Major version
KV4x Reference Manual, Rev. 2, 02/2015
Preliminary
Size
16 List of memory regions reserved by the flashloader.
Returned as value pairs (<start-address-of-region>,
<end-address-of-region>).
• If HasDataPhase flag is not set, then the
Response packet parameter count indicates the
number of pairs.
• If HasDataPhase flag is set, then the second
parameter is the number of bytes in the data
phase.
4 Start address of RAM
4 Size in bytes of RAM
4 Value of the Kinetis System Device Identification
register.
4 Indicates whether Flash security is enabled
0 - Flash security is disabled
1 - Flash security is enabled
[23:16] [15:8]
Minor version
Descripion
[7:0]
Bugfix version
Freescale Semiconductor, Inc.