Section 3
Local HMI
3.3
58
Keypad
The keypad is used to monitor and operate the IED. The keypad has the same look and
feel in all IEDs. LCD screens and other details may differ but the way the keys
function is identical.
IEC06000531 V1 EN
Figure 8:
The HMI keypad.
Table
7
describes the HMI keys that are used to operate the IED.
Table 7:
HMI keys on the front of the IED
Key
Function
Press to close or energize a breaker or disconnector.
IEC06000532 V1 EN
Press to open a breaker or disconnector.
IEC06000533 V1 EN
Press to open two sub menus: Key operation and IED information.
IEC05000103 V1 EN
Press to clear entries, cancel commands or edit.
IEC05000104 V1 EN
Press to open the main menu and to move to the default screen.
IEC05000105 V1 EN
Table continues on next page
1MRK505222-UUS C
Technical reference manual