ABB Relion 670 Series Technical Reference Manual page 972

Section 15
Monitoring
Name Values (Range)
OverTrigLe38 0 - 5000
Operation39 Disabled
Enabled
NomValue39 0.0 - 999999.9
UnderTrigOp39 Disabled
Enabled
UnderTrigLe39 0 - 200
OverTrigOp39 Disabled
Enabled
OverTrigLe39 0 - 5000
Operation40 Disabled
Enabled
NomValue40 0.0 - 999999.9
UnderTrigOp40 Disabled
Enabled
UnderTrigLe40 0 - 200
OverTrigOp40 Disabled
Enabled
OverTrigLe40 0 - 5000
Table 595: B1RBDR Non group settings (basic)
Name Values (Range)
Operation01 Disabled
Enabled
TrigLevel01 Trig on 0
Trig on 1
IndicationMa01 Hide
Show
SetLED01 Disabled
Enabled
Operation02 Disabled
Enabled
TrigLevel02 Trig on 0
Trig on 1
IndicationMa02 Hide
Show
SetLED02 Disabled
Enabled
Table continues on next page
966
Unit Step Default
% 1 200
- - Disabled
- 0.1 0.0
- - Disabled
% 1 50
- - Disabled
% 1 200
- - Disabled
- 0.1 0.0
- - Disabled
% 1 50
- - Disabled
% 1 200
Unit Step Default
- - Disabled
- - Trig on 1
- - Hide
- - Disabled
- - Disabled
- - Trig on 1
- - Hide
- - Disabled
1MRK505222-UUS C
Description
Over trigger level for analog cha 38 in % of
signal
Operation On/off
Nominal value for analog channel 39
Use under level trig for analog cha 39 (on) or
not (off)
Under trigger level for analog cha 39 in % of
signal
Use over level trig for analog cha 39 (on) or
not (off)
Over trigger level for analog cha 39 in % of
signal
Operation On/off
Nominal value for analog channel 40
Use under level trig for analog cha 40 (on) or
not (off)
Under trigger level for analog cha 40 in % of
signal
Use over level trig for analog cha 40 (on) or
not (off)
Over trigger level for analog cha 40 in % of
signal
Description
Trigger operation On/Off
Trig on positiv (1) or negative (0) slope for
binary inp 1
Indication mask for binary channel 1
Set red-LED on HMI for binary channel 1
Trigger operation On/Off
Trig on positiv (1) or negative (0) slope for
binary inp 2
Indication mask for binary channel 2
Set red-LED on HMI for binary channel 2
Technical reference manual