Function Block; Input And Output Signals; Setting Parameters - ABB Relion 670 Series Technical Reference Manual

Section 4
Basic IED functions
4.6.3
4.6.4
4.6.5
Table 37: TESTMODE Non group settings (basic)
Name Values (Range)
TestMode Disabled
Enabled
EventDisable Disabled
Enabled
CmdTestBit Disabled
Enabled
102

Function block

TESTMODE
INPUT ACTIVE
OUTPUT
SETTING
NOEVENT
IEC09000219-1.vsd
IEC09000219 V1 EN
Figure 34: TESTMODE function block

Input and output signals

Table 35: TESTMODE Input signals
Name Type
INPUT BOOLEAN
Table 36: TESTMODE Output signals
Name Type
ACTIVE BOOLEAN
OUTPUT BOOLEAN
SETTING BOOLEAN
NOEVENT BOOLEAN

Setting parameters

Unit Step
- -
- -
- -
Default Description
0 Sets terminal in test mode when active
Description
IED in test mode when active
Test input is active
Test mode setting is (Enabled) or not (Disabled)
Event disabled during testmode
Default Description
Disabled Test mode in operation (Enabled) or not
(Disabled)
Disabled Event disable during testmode
Disabled Command bit for test required or not during
testmode
1MRK505222-UUS C
Technical reference manual