ABB Relion 670 Series Technical Reference Manual page 483

1MRK505222-UUS C
7.11.5
Table 236: GUPPDUP (37) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
OpMode1 Disabled
UnderPower
Power1 0.0 - 500.0
Angle1 -180.0 - 180.0
TripDelay1 0.010 - 6000.000
DropDelay1 0.010 - 6000.000
OpMode2 Disabled
UnderPower
Power2 0.0 - 500.0
Angle2 -180.0 - 180.0
TripDelay2 0.010 - 6000.000
DropDelay2 0.010 - 6000.000
Table 237: GUPPDUP (37) Group settings (advanced)
Name Values (Range)
TD 0.000 - 0.999
Hysteresis1 0.2 - 5.0
Hysteresis2 0.2 - 5.0
IMagComp5 -10.000 - 10.000
IMagComp30 -10.000 - 10.000
IMagComp100 -10.000 - 10.000
VMagComp5 -10.000 - 10.000
VMagComp30 -10.000 - 10.000
VMagComp100 -10.000 - 10.000
IAngComp5 -10.000 - 10.000
IAngComp30 -10.000 - 10.000
IAngComp100 -10.000 - 10.000
Technical reference manual
Setting parameters
Unit Step
- -
- -
%SB 0.1
Deg 0.1
s 0.001
s 0.001
- -
%SB 0.1
Deg 0.1
s 0.001
s 0.001
Unit Step
- 0.001
pu 0.1
pu 0.1
% 0.001
% 0.001
% 0.001
% 0.001
% 0.001
% 0.001
Deg 0.001
Deg 0.001
Deg 0.001
Default Description
Disabled Operation Disable / Enable
UnderPower Operation mode 1
1.0 Power setting for stage 1 in % of Sbase
0.0 Angle for stage 1
1.000 Trip delay for stage 1
0.060 Drop delay for stage 1
UnderPower Operation mode 2
1.0 Power setting for stage 2 in % of Sbase
0.0 Angle for stage 2
1.000 Trip delay for stage 2
0.060 Drop delay for stage 2
Default Description
0.000 Low pass filter coefficient for power
measurement, P and Q
0.5 Absolute hysteresis of stage 1 in % Sbase
0.5 Absolute hysteresis of stage 2 in % Sbase
0.000 Magnitude factor to calibrate current at 5% of
In
0.000 Magnitude factor to calibrate current at 30%
of In
0.000 Magnitude factor to calibrate current at 100%
of In
0.000 Magnitude factor to calibrate voltage at 5% of
Vn
0.000 Magnitude factor to calibrate voltage at 30%
of Vn
0.000 Magnitude factor to calibrate voltage at 100%
of Vn
0.000 Angle calibration for current at 5% of In
0.000 Angle calibration for current at 30% of In
0.000 Angle calibration for current at 100% of In
Section 7
Current protection
477