ABB Relion 670 Series Technical Reference Manual page 923

1MRK505222-UUS C
Name Values (Range)
IB_RepTyp Cyclic
Dead band
Int deadband
IB_AngDbRepInt 1 - 300
IC_DbRepInt 1 - 300
IC_Max 0.000 -
10000000000.000
IC_RepTyp Cyclic
Dead band
Int deadband
IC_AngDbRepInt 1 - 300
Table 555: CMMXU Non group settings (advanced)
Name Values (Range)
IA_ZeroDb 0 - 100000
IA_HiHiLim 0.000 -
10000000000.000
IA_HiLim 0.000 -
10000000000.000
IMagComp5 -10.000 - 10.000
IMagComp30 -10.000 - 10.000
IA_LowLim 0.000 -
10000000000.000
IA_LowLowLim 0.000 -
10000000000.000
IMagComp100 -10.000 - 10.000
IAngComp5 -10.000 - 10.000
IA_Min 0.000 -
10000000000.000
IAngComp30 -10.000 - 10.000
IAngComp100 -10.000 - 10.000
IA_LimHys 0.000 - 100.000
IB_ZeroDb 0 - 100000
IB_HiHiLim 0.000 -
10000000000.000
Table continues on next page
Technical reference manual
Unit Step Default
- - Cyclic
Type 1 10
Type 1 10
A 0.001 1000.000
- - Cyclic
Type 1 10
Unit Step Default
m% 1 0
A 0.001 900.000
A 0.001 800.000
% 0.001 0.000
% 0.001 0.000
A 0.001 0.000
A 0.001 0.000
% 0.001 0.000
Deg 0.001 0.000
A 0.001 0.000
Deg 0.001 0.000
Deg 0.001 0.000
% 0.001 5.000
m% 1 0
A 0.001 900.000
Section 15
Monitoring
Description
Reporting type
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Maximum value
Reporting type
Cycl: Report interval (s), Db: In % of range,
Int Db: In %s
Description
Zero point clamping in 0.001% of range
High High limit (physical value)
High limit (physical value)
Magnitude factor to calibrate current at 5% of
In
Magnitude factor to calibrate current at 30%
of In
Low limit (physical value)
Low Low limit (physical value)
Magnitude factor to calibrate current at 100%
of In
Angle calibration for current at 5% of In
Minimum value
Angle calibration for current at 30% of In
Angle calibration for current at 100% of In
Hysteresis value in % of range and is
common for all limits
Zero point clamping in 0.001% of range
High High limit (physical value)
917