Parking Brake Control; Handle To Kill The Engine; Handle For Fuel Feed Manual Control - Belarus 1822.3 Operator's Manual

- screw in the chuck 2 with max. possible force of hand fingers.
The range of the steering wheel height adjustment is 100 mm, stepless.
To change the steering column tilt angle do the following:
- pull the handle 3.
- tilt the steering column to reach the position comfortable for work and releasing the
handle 3 swing the steering column smoothly in longitudinal direction until fixed firmly.
The steering column can be tilted and fixed in four positions from 25° to 40° with 5°
interval.
ATTENTION: HAVING FIXED THE STEERING COLUMN IN THE EXTREME
FRONT POSITION SET THE GEAR SWITCH LEVER OF THE GEARBOX TO A NEU-
TRAL POSITION, DISENGAGE GEARS OF THE GEARBOX (SET "0" GEAR), START
THE ENGINE AND WITH THE TRACTOR NOT MOVING MAKE SURE THE STEERING
CONTROL OPERATES WELL!
1 – steering wheel; 2 – chuck; 3 – handle to fix tilt of the steering column.

2.9 Parking brake control

Upper position of the lever 23 (figure 2.1.1) – parking brake "On";
Lower position of the lever 23 – parking brake "Off".

2.10 Handle to kill the engine

As you pull the handle of the red color 21 (figure 2.1.1) fuel stops to flow to the en-
gine cylinders and the engine stops running. When released the handle returns to the ini-
tial position.

2.11 Handle for fuel feed manual control

When the handle 35 (figure 2.1.1) is moved to the extreme front position, fuel is fed to the
max, when the handle is moved to the extreme rear position – fuel is fed to the min. in accordance
with the minimum idle speed.
Figure 2.8.2 – Steering wheel adjustment
37
https://tractormanualz.com/
2022.3-0000010 OM