Steering Wheel Adjustments; Parking Brake Control - Belarus 3522.5 Operator's Manual

2.10.3 Steering wheel adjustments

1 – steering wheel; 2 – chuck; 3 – handle to fix tilt of the steering column.
The steering wheel has the following adjustments:
horizon tilt angle adjustment;
o
height adjustment, along steering shaft axis.
o
To change height positioning of the steering wheel proceed as follows:
unscrew the chuck 2 (figure 2.10.2) by 3-5 revolutions;
o
set the wheel 1 to a position comfortable for work;
o
screw in the chuck 2 with max. possible force of hand fingers.
o
The range of the steering wheel height adjustment is 100 mm, stepless.
To change the steering column tilt angle do the following:
- pull the handle 3.
- tilt the steering column to reach the position comfortable for work and releasing the
handle 3 swing the steering column smoothly in longitudinal direction until fixed firmly.
The steering column can be tilted and fixed in four positions from 25° to 40° with 5°
interval.
ATTENTION: HAVING FIXED THE STEERING COLUMN IN THE EXTREME
FRONT POSITION SET THE GEAR SWITCH LEVER OF THE GEARBOX TO A NEU-
TRAL POSITION, DISENGAGE GEARS OF THE GEARBOX (SET "0" GEAR), START
THE ENGINE AND WITH THE TRACTOR NOT MOVING MAKE SURE THE STEERING
CONTROL OPERATES WELL!

2.11 Parking brake control

Upper position of the lever 1 (figure 2.11.1) – parking brake "On";
Lower position of the lever 1 – "Off".
To disengage the parking brake push the button 2 on the lever 1 and move the lever
down against the stop.
Figure 2.10.2 – Steering wheel adjustment
1 – parking brake control lever; 2 – button.
Figure 2.11.1 – Parking brake control
46
https://tractormanualz.com/
3522.5-0000010 РЭ