Initial Instrument Functionality Check
Initial Instrument Functionality Check
Power on the instrument and allow it to complete its boot up process. Verify that there are no
instrument messages that would indicate that there is an issue with either the instrument hardware
or software. If there are any issues, investigate and fix the problem before continuing with this
upgrade.
Option G2H Check
While the instrument is still powered on check to see if the instrument has Option G2H installed. To
do so press System, Show System and look on the System Information screen for Option G2H.
If the instrument has Option G2H installed it does not need this upgrade, as it should already have
this hardware installed.
Option ST1/ST2 Check
While the instrument is still powered on check to see if the instrument has Option ST1 or ST2
installed. To do so press System, Show System and look on the System Information screen for
Option ST1 or ST2. Note whether one of these options is installed or not below.
Option ST1 or ST2 Installed: __________ Yes __________ No
Option R40 Check
While the instrument is still powered on check to see if the instrument has Option R40 installed. To
do so press System, Show System and look on the System Information screen for Option R40.
Note whether Option R40 is installed or not below.
Option R40 Installed: __________ Yes __________ No
The following procedure will ask you to make decisions based on whether or not these options are
installed in the instrument.
8
Installation Note N9042-90012