Flash Memory Control Register 6 (Fmr6) - Renesas M16C/64C User Manual

M16C/64C Group
30.3.5

Flash Memory Control Register 6 (FMR6)

Flash Memory Control Register 6
b7 b6 b5 b4 b3 b2 b1
0 1
When accessing the FMR6 register, select a CPU clock frequency of 10 MHz or less by setting the
CM06 bit in the CM0 register and bits CM17 and CM16 in the CM1 register. Also, set the PM17 bit in
the PM1 register to 1 (wait state).
FMR60 (EW1 mode select bit) (b0)
To set the FMR60 bit to 1, write 1 when both FMR01 bit in the FMR0 register and FMR11 bit in the
FMR1 register are 1.
Change the FMR60 bit when the PM24 bit in the PM2 register is 0 ( NMI interrupt disabled) or high is
input to the NMI pin. Also, change this bit when the FMR00 bit in the FMR0 register is 1 (ready).
FMR61 (b1)
Set the FMR61 bit to 1 when using CPU rewrite mode.
R01UH0092EJ0110 Rev.1.10
Jul 31, 2012
b0
Symbol
FMR6
Bit Symbol Bit Name
FMR60 EW1 mode select bit
Reserved bit
FMR61
—
Reserved bits
(b4-b2)
—
Reserved bit
(b5)
—
Reserved bits
(b7-b6)
Address
0230h
Function
0 : EW0 mode
1 : EW1 mode
Set to 1
The read value is undefined.
Set to 0
The read value is undefined.
30. Flash Memory
Reset Value
XX0X XX00b
RW
RW
RW
RO
RW
RO
Page 666 of 807