Table of Contents
Advertisement
M16C/64C Group
30.9
Standard Serial I/O Mode
In standard serial I/O mode, a serial programmer supporting the M16C/64C Group can be used to rewrite
program ROM 1, program ROM 2, and data flash while the MCU is mounted on a board.
Standard serial I/O mode has following modes:
• Standard serial I/O mode 1: The MCU is connected to the serial programmer by using clock
• Standard serial I/O mode 2: The MCU is connected to the serial programmer by using 2-wire clock
For more information about the serial programmer, contact the serial programmer manufacturer. Refer to
the user's manual included with your serial programmer for instructions.
R01UH0092EJ0110 Rev.1.10
Jul 31, 2012
synchronous serial I/O
asynchronous serial I/O
30. Flash Memory
Page 699 of 807
Advertisement
Table of Contents
