Renesas M16C/64C User Manual page 362

M16C/64C Group
Table 19.2 Three-Phase Motor Control Timer Function Specifications (2/2)
Item
Three-phase PWM output
width
Dead time (width)
Active level
Simultaneous conduction
prevention function
Interrupt frequency
R01UH0092EJ0110 Rev.1.10
Jul 31, 2012
Triangular wave modulation :
m+1
n n'
m+1-n+n'
Sawtooth wave modulation :
n, n': Setting value of registers TA4, TA1, and TA2 (of registers TA4, TA41,
TA1, TA11, TA2, and TA21 when setting the INV11 bit to 1), 0001h to FFFFh
fi: Count source frequency (f1TIMAB, f2TIMAB, f8TIMAB, f32TIMAB,
f64TIMAB, fOCO-S, fC32)
p
or no dead time
------ -
fi
p: Setting value of the DTT register, 01h to FFh
fi: Count source frequency (f1TIMAB, f2TIMAB, f1TIMAB divided by 2,
f2TIMAB divided by 2)
Selectable either active high or active low
Simultaneous conduction prevention
Simultaneous conduction detection
A timer B2 interrupt is generated every carrier wave cycle to every 15 carrier
wave cycles.
19. Three-Phase Motor Control Timer Function
Specification
'
m 1 n n
+ – +
---------------------------------- -
fi
n
------ -
fi
Page 329 of 807