Renesas M16C/64C User Manual page 712

M16C/64C Group
Program Suspend
FMR00 bit
FMR31 bit
FMR33 bit
Erase Suspend
Erase command issued
FMR00 bit
Set to 1 by a program
FMR31 bit
FMR32 bit
FMR00: Bit in the FMR0 register
FMR33, FMR32, FMR31: Bits in the FMR3 register
The above assumes the following:
The FMR30 bit in the FMR3 register is 1 (suspend enabled).
Figure 30.9 Suspend Operation Example in EW0 Mode
R01UH0092EJ0110 Rev.1.10
Jul 31, 2012
Program command or
lock bit program command issued
Programming
Set to 1 by a program
td(SR-SUS)
Program command issued
Erasing
td(SR-SUS)
Programming
Program suspend
Program completed
Programming
Erase suspend
30. Flash Memory
Program completed
Set to 0 by a program
Erase completed
Erasing
Set to 0 by a program
Page 679 of 807