Renesas M16C/64C User Manual page 452

M16C/64C Group
Header pattern
Data 1 pattern
Data 0 pattern
The above shows the case for independent operation.
For independent operation, the ranges between minimum and maximum values of header, data 0, and
data 1 patterns should not overlap each other.
For combined operation, the ranges between minimum and maximum values of header, data 0, data 1,
and special patterns should not overlap each other.
Figure 22.4 Setting Values of the Header Pattern and Data Patterns
R01UH0092EJ0110 Rev.1.10
Jul 31, 2012
The PMCiD1PMIN
register value
The PMCiD0PMIN
The PMCiD0PMAX
register value
register value
22. Remote Control Signal Receiver
The PMCiHDPMIN
The PMCiHDPMAX
register value
register value
The PMCiD1PMAX
register value
Page 419 of 807