Isolate Wi-Fi Clients; Isolate Clients Connected To The Same Access Point - Digi TX54 User Manual

Wi-Fi

Isolate Wi-Fi clients

Client isolation prevents wireless clients connected to the TX54 device from communicating with
other clients. There are two mechanisms for client isolation configuration:

Isolate clients connected to the same access point

n
Isolate clients connected to different access points
n
This section provides instructions for both mechanisms.
Isolate clients connected to the same access point

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
4. Create a new access point or modify an existing access point. See
access point,
point with enterprise
5. Enable Isolate clients.
6. Click Apply to save the configuration and apply the change.

Command line
TX54 User Guide
Configure a Wi-Fi access point with personal
security.
Isolate Wi-Fi clients
Configure an open Wi-Fi
security, or Configure a Wi-Fi access
247