Nortel North American DMS-100 Instruction Manual page 458

23
At the MAP
24
25
At the TAMI
26
27
28
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (integrated)
Clearing MP keyboard trouble
Press every key on the MP keyboard. Verify that the system highlights the
keys on the MP display. Follow the prompts to exit the diagnostic.
If the keys
respond
do not respond
To run the HSLI test, type:
>TST HSLI
and press the Enter key.
>QUIT ALL
and press the Enter key.
If test
passes
fails
Replace the HSLI card. Refer to Card Replacement Procedures and return
to this point.
To run the diagnostic test on the keyboard, type:
>POSDIAG n MANKEY
and press the Enter key.
where
n
is the MP position number (0, 1, 2, or 3)
Press every key on the MP keyboard. Verify that the system highlights the
keys on the MP display. Follow the prompts to exit the diagnostic.
If keys
respond
do not respond
For additional help, contact the next level of support.
Do
step 29
step 24
Do
step 28
step 25
Do
step 29
step 28
1-437
(continued)