Tops Mp Operator Complaint (Standalone) Clearing Position Failure - Cannot Reboot Tpc - Nortel North American DMS-100 Instruction Manual

1-472 Trouble locating and clearing procedures (continued)
TOPS MP Operator complaint (standalone)
Clearing position failure - cannot reboot TPC
Application
Use this procedure to clear Traffic Operator Position System (TOPS) Position
Controller (TPC) reboot trouble.
Definition
An operator submits TOPS TPC reboot trouble when the operator cannot
reboot the TPC. The TPC Administration and Maintenance Interface (TAMI)
video dispay unit (VDU) displays an asterisk (*), autobooting or 1 meg of
memory.
Common procedures
Refer to the following common procedures:
•
•
Action
This procedure contains a flowchart and a list of steps. Use the flowchart to
review the procedure. Follow the steps to perform this procedure.
297-8021-544 Standard 14.02 May 2001
Placing an MP position in service (standalone)
Removing an MP position from service (standalone)