Nortel North American DMS-100 Instruction Manual page 667

1-646 Trouble locating and clearing procedures (continued)
VSLE session defaults to audio SLE
VSLE session defaults to audio SLE
At the MAP terminal:
1
2
3
4
5
297-8021-544 Standard 14.02 May 2001
To access the PM level of the MAP display, type
>MAPCI;MTC;PM
and press Enter.
To post the peripheral module (PM) unit, type
>POST pm_type pm_number
and press Enter.
where
pm_type
is the PM type (LGC, LTC, RCC, SMS, or SMU)
pm_number
is the number of the PM (0 through 127)
To check for fault indicators in the CLASS modem resource (CMR) card, type
>QUERYPM FLT
and press Enter.
If CMR card
is in-service trouble (ISTb) or
out of service
is not ISTb or out of service
To switch activity of the unit in order to restore service quickly, type
>SWACT
and press Enter.
If SWACT passes and problem
is present
is nt present
To switch activity back to the original unit, type
>SWACT
and press Enter.
If SWACT passes and problem
is present
is not present
(continued)
Do
step 6
step 4
Do
step 22
step 5
Do
step 22
step 20