Tops Mp Operator Complaint (Standalone) Clearing Position Failure - Cannot Rts Position - Nortel North American DMS-100 Instruction Manual

Application
Use this procedure to clear Traffic Operator Position System (TOPS)
Multipurpose (MP) position Return to Service (RTS) trouble.
Definition
Submit TOPS MP RTS trouble when the Tops Position Controller (TPC) is
booted and the MP position fails to RTS. The Position Status/Control menu
displays the MP position status as system busy (Sysb) or initializing MP
appears.
Common procedures
Refer to the following common procedures:
•
•
Action
This procedure contains a flowchart followed and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform this procedure.
DMS-100 Family NA100 Trouble Locating and Clearing Procedures Volume 2 of 2 LET0015 and up
Trouble locating and clearing procedures (continued) 1-483
TOPS MP Operator complaint (standalone)
Clearing position failure - cannot RTS position
Placing an MP position in service (standalone)
Removing an MP position from service (standalone)