1-568 Trouble locating and clearing procedures (continued)
TOPS MPX terminal system diagnostic
TOPS MPX
(continued)
MESSAGE
INSTRUCTIONS
14
297-8021-544 Standard 14.02 May 2001
Write Protect Line
Test Running
Now remove your scratch disk in Drive A. Remove the
write protection and reinsert the diskette.
ENTER = Continue
Take the scratch disk out of Drive A. Flip the write protect tab on back of the
diskette to the up position, so you cannot see through the opening (write
enable position). Insert the scratch disk in Drive A again.
Press ENTER to continue
Page 1 of 1
Page 1 of 1